Medical Double panel led film lights with adjustable brightness for
radiographic film
Detailed Images
Product Description
Product Overview
STATEMED Series LED Film viewer (LED film viewer), adopting
contemporary advanced LED solid-state light source and backlight
source technology, is the new generation observation device for
medical imaging films. As for the viewing screen, not only its
brightness but also the uniformity and stability of brightness are
high, without any dark spaces and flickers. The light source is
characterized by rapid light-emitting, little color temperature
attenuation and non- mercury. Therefore, the LED film viewer is of
great value that can greatly enhanced the quality of observation
device for medical imaging films and ensure the diagnostic quality
of medical imaging.
Technology standard
Conform to YY/T 0610-2007 "General Specifications for Illuminators
of Medical Image Film"
Normal operating conditions
a) Environmental temperature: +5℃~+35℃;
b) Relative humidity: Not more than 75%;
c) Atmospheric pressure: 75KPa~106KPa;
d) Input voltage: AC220V±10%, Frequency: 50/60Hz;
e) The equipment should be well earthed and the earth resistance
should be not more than 0.1Ω.
Environmental conditions of storage and transportation
a) Environmental temperature: -40℃~+55℃;
b) Relative humidity: Not more than 93%;
c) Atmospheric pressure: 50KPa~106KPa;
e) Ventilated room without corrosive gas, and dust.
Detailed Information
Functions of LED Film viewer
Function of brightness: Brightness adjustment shall be continuous
and uniform without flickers.
Function of inserts control: There is an insert controller inside
the LED Film viewer, the film viewer will become bright when insert
the film and will be dark when remove the film.
Optical parameters
1) Fixed brightness type: the max brightness ≥ 4000cd/m2, or ≥ 6000
cd/m2.
Adjustable brightness type:the max brightness ≥ 4000cd/m2, or ≥
6000 cd/m2; and the min brightness ≤ 300cd/m2;
2) Brightness uniformity of viewing screen ≥ 0.8;
3) Color temperature of light source > 6500K;
4) Brightness stability of viewing screen ≤ 2%;
5) Scattering coefficient of viewing screen > 0.9;
6) Starting time and flickers
a) Once switch it on, the film viewer will become bright and reach
the rated brightness within 1 second.
b) No flickers.
Working principles
Main parts of equipment: LED light source, light guide plate,
reflecting film, viewing screen, switching mode power supply, and
film clip.
The power supply of LED light source can be got though converting
AC220V to DC24V by switching mode power supply.
After refracting by light guide plate and reflecting by reflecting
film many times, the strong light with high color temperature
emitting from the LED light source, enables the uniform, soft and
white light appear on the viewing screen for film observation.
The film clip ensures that films can be conveniently and firmly
inserted on the viewing screen, also be removed easily.
Use method
First, close the power switch on the plate; second, plug one end of
the power plug into the socket which is in gap position on the side
of LED Film viewer; lastly, plug the other end into three-core
power socket of AC; then AC will be connect to this equipment.
Then, open the power switch on the plate, then observe the uniform
and white light appearing on the screen; and the brightness of
viewing screen will be stable one second later.
Hold the bottom of the film and insert the top part into film clip
along the surface of LED Film viewer. The film will be on the
surface of screen after you loosening hands, and then you can
observe the film.
Hold the bottom of the film then pull down it gently to remove it
from film clip.
If not use for long time, please close the power switch or unplug
it from the AC power socket.
For LED Film viewer with luminance adjustment, the light source
service life may be shortened if in max brightness state for long
time.
For LED Film viewer with inserts control, the screen will became
bright when inserts the films and become dark when remove it.
Without waterproof function, this equipment is only suitable for
observing dry films. Wet films must be dried before inserting it
into screen; if not, equipment faults or personal injury may
happen.
Payment and Delivery
T/T, LC, etc
Why Choose Us ?
1. Low MOQ, we can accept 1 piece orders
2. TOP PERFECT QUALITY
3. REASONABLE PRICE
4. FAST DELIVERY
5. EXCELLENT SERCIVE AFTER SERCIVE
6. 10+ EXPERIENCE ON INTERNATIONAL TRADE BUSINESS
